返回列表 发帖

t60更新 bios了

同时更新的有bt
提醒一下

懒得看英文

TOP

再等等吧,马上就出支持Merom的BIOS啦!已有人用内测版的BIOS支持Merom成功的啦!

TOP

水平有限 看不大懂~~~

TOP

看不大明白!
晕就一个字!

TOP

好像没有什么关键更新。。
<1.01>
- (New) Support for the Deep Smart Power Down feature.
         The Deep Smart Power Down turns off a network interface card
         when a link being down or a network cable being disconnected.
         This function is available in the Windows XP and functions
         when a system is in battery mode.
         The feature will only work with the Intel PRO/1000 PL Network
         Connection 9.2.43.0 (or later).
- (Fix) HV expansion state is always on regardless of the setting of
         the BIOS setup.
- (Fix) ATI Display property does not show a correct memory type.

<1.02>
- (Fix) Shutdown function does not work on the DOS.

<1.03>
- (New) Support for new devices.
- (Fix) When a T60 system is warm docked to a ThinkPad Advanced Dock
         with a hard drive installed, a Hard Disk Password will not
         prompt and the hard drive does not unlock.
- (Fix) When a LCD lid is closed and opened again, a screen
         resolution may change. This will happen only on the Intel
         Graphics Media Accelerator 950 models only.

<1.04>
- (Fix) Ethernet device does not work intermittently after resuming
         from standby in battery mode. Deep Smart Power Down feature
         is temporary disabled.

<1.05>
- (New) POST 2100 error is subdivided to show individual error
         message for hard drive.
- (Fix) Support for the Deep Smart Power Down feature.
         Note: The feature will only work with the Intel PRO/1000 PL
         Network Connection 9.2.50.0 (or later).
- (Fix) Data Execution Prevention is not correctly disabled in BIOS
         Setup utility.
- (Fix) Performance degradation occurs on infrared device at 4M bps
         transfer rate.

<1.06>
- (New) 1920x1200 resolution display support for Intel video models.
- (Fix) Incomplete docking actions may happen.
         Devices plugged into the docking station side are not
         recognized.
- (Fix) Muting beep sound does not work upon entering standby.
- (Fix) Improved frame drop during DVD playback in battery mode.
- (Fix) Wrong characters may be input when you enter information
         with an external PS/2 type keyboard via Y-Cable.
           - Numeric characters (2, 4, 6 and 8) will be inserted
             intermittently during cursor move with cursor keys.
           - A keyboard behaves as if a shift key is pressed until
             a shift key is actually pressed.
           - You can only type Uppercase characters. (Some keys
               seem to be input, because the shift cases are not
               defined)
           - Multiple selection with cursor keys.
           - Numeric keypad will turn to cursor keys.

<1.07>
- (New) "Intel Inside" Logo is updated.
- (Fix) POST 1820 error occurs on the following system condition.
         - Wireless WAN model, and
         - Wireless WAN is disabled by BIOS Setup or Wireless hardware
           switch (BIOS Setup->Config-> Network->Internal Wireless
           Device), and
         - An external USB Finger Print reader is connected to the
           left side USB port of the system or any USB port in the
           docking station.
- (Fix) When the Password reset service of BIOS Setup is enabled
         (BIOS Setup->Security->Password->Password Reset Service) and
         Passphrase is disabled (BIOS Setup->Security->Password->Using
         Passphrase), POP(Power On Password) or HDP(Hard Disk
         Password) may not be unlocked with a registered password by
         the Password reset service.

   Note: Some 15inch XGA(1024x768) LCD will not display correctly with
         BIOS version 1.06 or previous.  Please use version 1.07 or
         later for this case.

<1.09>
- (New) Upgraded to latest microcode update for Intel Core processor.
- (Fix) Entering standby may fail in a certain case. USB host controller
         setting is changed to fix.
- (Fix) Fails to boot from a USB device while the global switch being off.
- (Fix) USB device enumeration fails at hot dock after undock without eject PC.
- (Fix) Stops checking battery voltage for a while after starting trickle charge.
- (Fix) The EC intermittently hangs. (ThinkLight does not light)
- (Fix) The cooling fan may go high speed rotation for a while after switching to
         the Maximum Battery Life mode.
- (Fix) Presentation Director can not switch to an external display when a
         system fails to detect it.

<1.10>
- (Fix) Timeout may take more than 30 seconds if PXE (Preboot eXecution Environment)
         network boot does not succeed.

TOP

返回列表