如题，原来也都刻录过，软件和光盘应该都没问题，T61,刚用过一年多。
sanhaoonline.com
sanhaoonline.com
4A21-8599-0436-7231-1391-2772
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004-7-28 16:51:12
Nero版本： 6.6.0.1
刻录机： <MATSHITA DVD-RAM UJ-862> 版本: RB01 - HA 0 TA 0 - 6.6.0.1
适配卡驱动程序： <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <MATSHITA DVD-RAM UJ-862 >版本: RB01 - HA 0 TA 0 - 6.6.0.1
适配卡驱动程序： <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-862 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500BEVS-08UST0 iaStor Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-862 H: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2014MB (2062548kB)
Free physical memory: 1099MB (1125692kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.9.2009
ISO编辑
23:46:45 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23:46:45 #2 Text 0 File Reader.cpp, Line 127
Reader running
23:46:45 #3 Text 0 File Writer.cpp, Line 122
Writer MATSHITA DVD-RAM UJ-862 running
23:46:45 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
23:46:45 #5 Text 0 File Burncd.cpp, Line 3117
Turn on 光盘一次刻录, using DVD media
23:47:38 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1801167 (400:15.42, 3517MB)
23:47:38 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
23:47:38 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: MATSHITA DVD-RAM UJ-862, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
23:47:38 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)
23:47:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1801168 (1801168) = #1801168/400:15.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1801168 blocks [MATSHITA DVD-RAM UJ-862]
--------------------------------------------------------------
23:47:38 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [MATSHITA DVD-RAM UJ-862] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3688792064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1801168 | lead-out | 1 | 0x00 | 0x41
23:47:39 #12 Phase 24 File dlgbrnst.cpp, Line 1853
文件暂存过程开始
23:47:39 #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
23:47:39 #14 Phase 25 File dlgbrnst.cpp, Line 1853
文件暂存过程完成
23:47:39 #15 Phase 36 File dlgbrnst.cpp, Line 1853
以8x (11,080 KB/s)的速度开始刻录
23:47:39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
23:47:39 #17 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
23:47:39 #18 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 5:43,798 (343798ms) -> OK
23:47:39 #19 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes
23:49:40 #20 SCSI -400 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04660000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x85 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x00 0x82 0xF0 0x0A
0x00 0x29 0x00 0x00 0x03 0x00
23:49:40 #21 CDR -400 File Writer.cpp, Line 311
未指定的目标错误
23:49:40 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
23:49:40 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
23:49:50 #24 Phase 127 File dlgbrnst.cpp, Line 1853
正在生成DVD高兼容性边界
23:51:45 #25 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
23:51:45 #26 Phase 129 File dlgbrnst.cpp, Line 1853
已完成生成DVD边界
23:51:45 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
23:51:45 #28 Phase 38 File dlgbrnst.cpp, Line 1853
以8x (11,080 KB/s)的速度刻录失败
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 2001-8-17 14:07:32
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-6-6 3:00:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 2007-11-3 13:10:02 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 2008-4-14 2:40:30 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[ 本帖最后由 mural 于 2009-9-24 23:59 编辑 ] |
发表于 2009-9-24 22:10
| 
发表于 2009-9-24 22:25
| 
发表于 2009-9-24 22:45
| 
